-
What are the unique alloy compositions of stainless steel coils
The unique alloy composition core of stainless steel coils is chromium (Cr) and nickel (Ni), combined with elements such as carbon (C), molybdenum (Mo), titanium (Ti), etc., forming diverse properties through different proportions to adapt to different usage scenarios (such as rust prevention, high temperature resistance, and corrosion resistance).
2025-09-29 -
Introduce the processing techniques that affect the surface hardness of stainless steel strips
The processing technology that affects the surface hardness of stainless steel strips revolves around two main logics: "cold working deformation" and "heat treatment control". By changing the internal crystal structure of stainless steel strips (such as grain refinement and internal stress accumulation), their surface and overall hardness are directly determined. Among them, cold rolling process i
2025-09-23 -
What are the surface treatment processes for stainless steel coils
The surface treatment process of stainless steel coils can be divided into three categories according to core requirements, which are simplified as follows: 1、 Basic treatment: Bottom layer to remove defects Degreasing: Use cleaning agents/ultrasonic waves to remove oil stains and fingerprints, preparing for subsequent processes, suitable for pre-treatment of all roll materials. Acid pickling:
2025-09-16 -
Where is the corrosion resistance of stainless steel strip reflected
The corrosion resistance of stainless steel strips does not stem from the material's "non rusting" properties, but rather from its formation of an "active defense system" against environmental media (such as oxygen, water, acid-base solutions, etc.) through specific composition design and surface passivation mechanisms. The core is reflected in the following three aspects:
2025-09-09 -
What are the applications of stainless steel coils in mining equipment
Stainless steel coils are widely used in mining equipment (including mining, oil and gas mining, deep-sea mineral mining, etc.) due to their excellent corrosion resistance, high strength, and processability. The core is to solve the pain points of "high corrosion, high wear, and complex working conditions" in mining environments. Specific applications can be divided into the following categories a
2025-09-03 -
Briefly introduce the tensile strength of stainless steel strip
The tensile strength of stainless steel strip refers to the ratio of the maximum tensile force it can withstand to the cross-sectional area before tensile fracture (usually measured in MPa), which is the core mechanical indicator for measuring its tensile resistance. The main characteristics and key information can be summarized as the following three points:
2025-08-26 -
Why is stainless steel coil used for the shell of large storage tanks
The shell of large storage tanks is made of stainless steel coils, which are designed to meet the core requirements of "long-term storage, safe pressure bearing, and adaptability to various media" by utilizing their characteristics of corrosion resistance, good formability, stable strength, and easy maintenance, especially for harsh storage environments such as corrosion, high temperature, and hyg
2025-08-19 -
What is the cold rolling process for stainless steel strip
The cold rolling process of stainless steel strip is the process of rolling and processing the hot-rolled stainless steel strip at room temperature to obtain higher dimensional accuracy, better surface quality, and specific mechanical properties. Its process is complex and requires strict equipment and operation. The specific process is as follows:
2025-08-12 -
What are the performance advantages of stainless steel strips
Stainless steel strip is a strip product made from stainless steel through rolling, slitting and other processes. With its unique material properties and processing performance, it is widely used in many fields. Its performance advantages are mainly reflected in the following aspects:
2025-07-29 -
What is the wear resistance of stainless steel coils
The wear resistance of stainless steel coils is not fixed, but depends on their alloy composition, microstructure, surface state, and specific usage environment (such as friction mode, load size, medium corrosiveness, etc.). Overall, it presents a "moderate to high" characteristic, and there are significant differences among different models. The following is a specific analysis from two aspects:
2025-07-22
- 07-222026
What equipment is stainless steel strip commonly used in the energy industry
Classify and organize according to new energy, traditional electricity, oil and gas petrochemicals, hydrogen energy, and nuclear power, and distinguish three types of uses: ultra-thin precision steel strips, structural bundling steel strips, and heat-resistant conveyor steel strips:
- 07-132026
What issues should be noted when rolling stainless steel coils
Stainless steel has high deformation resistance, is prone to work hardening, is easily oxidized at high temperatures, and is prone to cracking at the edges. It is divided into two parts: hot-rolled billet rolling and cold-rolled precision rolling. The raw materials, temperature, process parameters, equipment, lubrication, plate shape tension, surface protection, and later microstructure and proper
- 07-072026
What are the main uses of hot-rolled stainless steel coils in stainless steel coils
Hot rolled stainless steel coil is a thick material coil produced by high-temperature rolling, with a thickness range of 1.5-16mm and a surface with oxide black skin. It is thick in size, high in strength, and does not require appearance. It is mainly used in structural pressure bearing, chemical equipment, and heavy machinery scenarios.
- 06-302026
Why does stainless steel strip become magnetic after cold processing
1、 Core material foundation: 304/316L itself is austenitic non-magnetic stainless steel 304 and 316L belong to austenitic stainless steel. In the factory solution annealed state, all internal crystals are austenitic structure, and the austenitic crystal structure does not have ferromagnetism. The new soft steel strip is almost non-magnetic, and the magnet does not adsorb.
- 06-222026
What processing can be done on stainless steel coils
1、 Open coil basic processing (the first process of coil material) 1. Kaiping/Splitting Kaiping: Stainless steel coils are uncoiled, leveled, and cut into flat plates (stainless steel plates) for cutting, bending, and laser cutting. Slitting: Large rolls are cut into narrow strips of steel for welding pipes, steel strips, precision stamping, strapping, and decorative edge strips.
Jiangsu Lichao New Material Technology Co., Ltd.
WeChat ID:jinjiayi0512
Add WeChat
Contact us
The phone